1. G. Chen, "Study of the Solidification of Cast Iron by Computer-Aided Differential Thermal Analysis" (1982).
2. F. O. Martinez, "Development of Compacted/Vermicular Graphite Cast Irons in the Fe-C-Al System" (1983).
3. J. C. Hendrix, "Directional Solidification of Flake and Spheroidal Graphite Cast Iron in Low and Normal Gravity Environment (1983).
4. J. T. Fowler, "Experiments on Producing Compacted/ Vermicular Graphite Cast Iron by the In-Mold Process" (1984).
5. C. S. Kanetkar, "Study of the Influence of Some Individual Rare Earths (Ce, La, Pr, Nd) and Yttrium in Cast Iron" (1985).
6. S. K. Biswal, "Neutralization of Deleterious Effects of Bismuth and Lead in Gray Cast Iron by Lanthanides Additions" (1986).
7. M. R. Fiske, "The Effects of Low Gravity on the Directional Solidification of Some Eutectic and Monotectic Alloys" (1986).
8. A. Aykut, "Study of Grain Refinement and Modification of Hypoeutectic Al-Si Alloys by Computer-Aided Thermal Analysis" (1987)
9. K. Singh, "The Role of Gravity during the Solidification of Miscibility Gap Alloys" (1987).
10. S. Kacar, "Interaction between Silicon Carbide Particles and the Solid-Liquid Interface in Aluminum Based Metal Matrix Composites." (1988).
11. D. K. Bandyopadhyay, "Influence of Variable Gravity Level on the Solidification of In-situ Iron-Vanadium Carbide Composites" (1988).
12. F. Rana, "SiC Particle Dispersion in Aluminum Alloy Metal-Matrix Composites" (l988).
13. Moitra, "Behavior of Source Particulate Metal Matrix Composites during Solidification on Ground and Micro-Gravity Conditions" (1988).
14. S. Sen, "Fabrication of High Temperature Super-conducting Bulk Materials and Wires through a Ceramic/Metal Composite Route" (1989).
15. S. Chang, "Modeling of the Solid State Transformation: the Eutectoid Reaction in Spheroidal Graphite Iron" (1990).
16. Y. Ko, "Processing and Characterization of Aluminum Alloys Reinforced with SiC Particles by Squeeze Casting" (1991)
17. J. M. Frost, "Melt Quality Assessment of Spheroidal Graphite Cast Iron Through Computer - Aided Cooling Curve Analysis" (1992)
18. J. Haftek, "Processing and Characterization of Amorphous Al-Y-Ni Matrix SiC Particulate Composites" (1992)
19. L. Nastac, "Mathematical Modeling of Equiaxed Dendritic Solidification - Second Generation of Computer Models" (1993)
20. S. Visvanathan, "Effect of Processing Parameters on Graphite Structure in Ductile Iron as Revealed by Cooling Curve Analysis" (1993)
21. S. R. Giese, "An Investigation on the Role of Sand-Metal Contact Angle in the Formation of Casting Penetration Defects" (1994)
22. R. V. Phalnikar, "Prediction of Distribution of Inclusions in Steel Castings" (1994)
23. H. Otsubo, “Evaluation and Analysis of Porosity Formation in Cu-Sn-Zn Alloys” (1995)
24. V. Catalina, ”Computational Modeling of Room Temperature Microstructure of Cast Iron” (1996)
25. F. R. Juretzko, “Experimental Evaluation of Some Models for Particle Pushing” (1997)
26. M. A. Pershing, “An Assessment of some Models for Micro- and Macro-segregation as applied to Cast Steel” (1997)
27. R. S. Bhamidipati, “Experimental and Numerical Evaluation of Pushing and Engulfment of Particles at the Solidifying Interface” (1997)
28. J. O. Barlow, “Steel Penetration in Sand Molds” (1998)
29. Kevin D. Hayes, “Mechanical and Chemical Penetration of Steel in Sand Molds” (1998)
30. Jose Torres, “Influence of Microgravity on Macrosegregation” (2000)
31. Sundeep Mukherjee, “An Experimental and Theoretical Study of Liquid Convection Effects on Particle Engulfment and Pushing” (2001)
32. Christie Corbitt, ”Optimization of Thin Wall Ductile Iron Castings” (2001)
33. John Torrance, ”An Investigation on the Effect of Surface Roughness on the Static Mechanical Properties of Thin-Wall Ductile Iron Castings” (2004)
34. Lucas P. Dix, “Processing-Microstructure-Properties Correlation for Lightweight Ductile Iron Castings” (2004)
35. Jonathan Woolley, “The Influence of Process Variables on Microshrinkage Formation in Thin Wall Ductile Iron” (2005)
36. April Pitts (2006)
37. Ramesh Rao, “An Investigation into the Production of Thin Wall Compacted Graphite Cast Iron” (2006)
38. Stephanie Collins, “Study of the Effect of the Casting Skin on the Tensile Properties of Light Weight Ductile Iron Castings” (2007)
39. Evan Standish, “Design of a Molten Materials Handling Device for Support of Molten Regolith Electrolysis” (2010)

PH.D. DISSERATIAIONS: 16

1. C.S. Kanetkar, "Mathematical Modeling of Micro-structural Evolution during Solidification of Cast Irons and Al-Si Alloys" (1988).
2. G.K. Upadhya, "Mathematical and Physical Modeling of Structural Transitions in Some Metallic Systems" (1991).
3. D.K. Banerjee, "Heat Transfer - Solidification Kinetics Modeling of Some Dendritic and Eutectic Alloys" (1992)
4. H.Tian, "Evaluation of some Material Parameters Associated with Solidification Kinetics of Fe-C-Si Alloys" (1992)
5. S Ahuja, "Theoretical and Experimental Investigations on the Interaction between Solid/Liquid Interfaces and Insoluble Particles" (1992)
6. S. Sen, "Solidification Processing, Interfacial Stability, and Mechanical Properties of Discontinuously Reinforced Ni3Al Matrix Composites" (1993)
7. S. Chang, "Numerical Modeling of Micro- and Macro-Segregation in Casting Alloys" (1994)
8. L. Nastac, “Simulation of Microstructure Evolution during Solidification Processes” (1995)
9. J. Haftek, “Simulation of Equiaxed Peritectic Solidification during Continuous Cooling” (1996)
10. S.R. Giese, “An Investigation of Cast Iron Metal Penetration Defects” (1996)
11. X. Guo, “Prediction of Selected Mechanical Properties of Ferrous Alloys Through Computational modeling of Solidification” (1997)
12. A.V. Catalina, “Mathematical Modeling of the Interaction between an Insoluble Solid Particle and a Solidifying Interface” (2000)
13. F.R. Juretzko, “Particle Engulfment and Pushing in Metal-Ceramic and Organic Metal-analogue Systems in Micro-Gravity (2000)
14. S. Charoenvilaisiri, “Microstructure Control of Compacted Graphite Iron for Thin Wall Iron Castings” (2001)
15. L. Beltran-Sanchez, “Quantitative Micro-modeling of Dendrite Growth Controlled by Solutal Effects in the Low Péclet Regime for Binary Alloys” (2003)
16. Jose Leon-Torres, “Thin-Wall Nodular Cast Iron: Numerical Modeling and Experimental Validation” (2003)